{"title":"Nissan 300ZX (Z32) Engine Swap Kits","description":"\u003cp\u003e\u003cstrong\u003eSwap kits are offered in four stages:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBASIC\u003c\/strong\u003e - The basic kits get you just what you need to get the engine into the car. These typically consist of Motor Mounts, Trans Mounts, Oil Pans, Driveshafts, Heater Core Outlets (When Necessary), Trans Adapters (When Needed) and Short Shift Linkages (Depending on Trans). These kits are aimed at the do-it yourself kind of guy who is interested in figuring out their own exhaust, wiring, accessory drives, oil filter relocation, and other odds and ends. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINTERMEDIATE\u003c\/strong\u003e - The intermediate kits add on a few more features to the basic kits to make the installation more plug and play. The intermediate kits typically add an accessory drive package, fuel system solution, oil filter relocation kits, and a few other components. These kits are aimed at the do-it-yourself guys who want to save time by taking the guesswork out of many aspects of a swap. There will still need to be some work done to figure out the exhaust system, cooling system, and wiring, but the bulk of the guesswork is done here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMASTER\u003c\/strong\u003e - The master kits include every component in the intermediate kits, but also add harmonic balancers, water pumps, wiring, ECUs, sensors and headers. Some master kits even include mid-pipes for bolting LOJ swap headers to your existing cat-back exhaust. These kits are aimed at the customer who wants all of the guesswork removed. They just want to buy an LSx Gen 3 or 4 engine and drop it in. The only aspect not covered in the master kits is the radiator, fans, and air intake setup. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eULTIMATE\u003c\/strong\u003e - The ultimate kits are simply the most comprehensive kits available for the 300ZX. These kits include every component in the master kits, but also add a custom radiator and fans. The radiator is made by C\u0026amp;R Racing and is specifically designed and sized properly for an LS engine in a 300ZX without modifications.\u003c\/p\u003e","products":[{"product_id":"0-test300zx-lsx-basic-swap-kit-4l60e-transmission","title":"300ZX LSx BASIC Swap Kit - 4L60E Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Basic Swap kit is the most economical engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible. Every component required to successfully bolt an LSx Gen 3 or 4 engine into your 300ZX is included with this kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM 4L60E Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for 4L60E Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Driveshaft\u003c\/strong\u003e Available in Steel, Aluminum, and Carbon Fiber)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUse of GM 4L60 Transmissions require SIGNIFICANT modifications to transmission tunnel! \u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe amount of modifications varies depending on which 4L60 you decide to run. The earlier transmissions with the integrated bellhousing require less work than the later transmissions with the removable bellhousing.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. This is the area where the amount of denting will vary on which trans used. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. Lastly, the actual mounting point on the car will need to be cut on the passenger side. Please look at our 4L60 trans mount, and you will see that the passenger side of the mount only uses 2 of the three mounting holes. The mount location interferes with the trans pan which is why it needs to be cut out.\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2671264858133,"sku":null,"price":1499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_4L60_02.jpg?v=1756742578"},{"product_id":"300zx-lsx-basic-swap-kit-t56-transmission","title":"300ZX LSx BASIC Swap Kit - T56 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Basic Swap kit is the most economical engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible. Every component required to successfully bolt an LSx Gen 3 or 4 engine into your 300ZX is included with this kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM T56 Manual Transmission (GTO Shift Linkage Preferred**)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for T56 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Driveshaft\u003c\/strong\u003e Available in Steel, Aluminum, and Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e**GTO Shift linkage will place the shifter in the stock location. CTS-V Linkage will place the shifter behind stock and F-Body will be ahead of the stock opening. For installation simplicity, the GTO shifter is easier to adapt due to its rigid mounting to the transmission. A GTO shifter can be installed onto an F-Body transmission with relative ease.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2672491167765,"sku":null,"price":1499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_T56_01.jpg?v=1756742573"},{"product_id":"300zx-lsx-basic-swap-kit-th400-transmission","title":"300ZX LSx BASIC Swap Kit - TH400 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Basic Swap kit is the most economical engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible. Every component required to successfully bolt an LSx Gen 3 or 4 engine into your 300ZX is included with this kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM TH400 Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for TH400 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Driveshaft\u003c\/strong\u003e Available in Steel, Aluminum, and Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2672504078357,"sku":null,"price":1499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_TH400_02.jpg?v=1756742571"},{"product_id":"300zx-lsx-basic-swap-kit-z32-transmission","title":"300ZX LSx BASIC Swap Kit - Z32 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Basic Swap kit is the most economical engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible. Every component required to successfully bolt an LSx Gen 3 or 4 engine into your Non-Turbo 300ZX is included with this kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses your stock 300ZX Manual Transmission (NA or TT) \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z32 300ZX (Transmission is Relocated to the rear 3\"\/75mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Shortened Shift Linkage (to keep shifter in stock location after transmission relocation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Z32 Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(300ZX Flywheel accepts 350Z\/G35\/R32GTR\/Z32NA Clutch and uses a TT ring gear, Starter shim included for NA transmission use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Driveshaft\u003c\/strong\u003e Available in Steel, Aluminum, and Carbon Fiber)\u003cspan style=\"line-height: 1.4;\"\u003e \u003cem\u003eYou MUST either purchase a new driveshaft, or have your existing driveshaft shortened by 3\" (75mm)\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003e\u003cstrong\u003eFrequently Asked Questions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use a T56\/TR6060? \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, please see out swap kit for GM transmissions by \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-twin-turbo-1990-1996-swap-kits\/products\/300zx-twin-turbo-lsx-basic-swap-kit-t56-transmission\" title=\"clicking here\"\u003eclicking here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cspan\u003eWhy use the 300ZX transmission then?\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe RS5R30A transmission found in the Z32 300ZX is a VERY STOUT transmission. This is the same \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003etransmission that is found in the R32 and R33 Nissan Skyline GTRs, just in RWD guise. It is robust, has \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eample aftermarket support, and can be found inexpensively.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe T56\/TR6060, while great transmissions, are expensive and difficult to come by. \u003c\/span\u003e\u003cspan class=\"Normal_text\"\u003eOur complete swap \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003ekit costs about the same as a T56\/TR6060 and an aftermarket aluminum flywheel!\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eMost folks performing this swap will have an easier time finding an LS engine from an automatic \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eequipped vehicle. Our kit saves you the trouble of finding a T56 and includes a billet aluminum flywheel \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eto boot.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur swap kit was designed from the get-go to use the stock Nissan 5-Speed. There are several reasons \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor this:\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYou're moving the transmission, do I need a new driveshaft?\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, and a new driveshaft is available with our kit! If you do not want to buy a new driveshaft, you CAN have your stock driveshaft or aftermarket 1-piece driveshaft shortened. We can perform this service for $150+shipping if you'd like. There is an approximate 1-week turnaround time for this service. Please contact us for more information.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eRegardless of Transmission Used (NA or TT), an NA Clutch is required.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWhat about my stock automatic transmission?\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur adapter plate will allow the stock automatic transmission (Turbo RE4R03A or NA RE5R03A) to \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ephysically bolt to the engine. However, we do not stock flexplates that will allow the converter to attach. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eWe can make these on a special order basis, please contact us for more information. Please keep in \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003emind, the GM PCM can not control the Z32 transmission. This will the require the user to purchase and \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eprogram a standalone transmission controller. Furthermore, the NA transmission was not designed to \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ehandle the power of even a stock 5.3L LM4. If you would like to stay auto, we highly recommend \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-twin-turbo-1990-1996-swap-kits\/products\/300zx-twin-turbo-lsx-basic-swap-kit-4l60e-transmission\"\u003eour kit for using the 4L60E\u003c\/a\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my transmission?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eNo modifications are required when using a TT Transmission, an NA transmission will require slight \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ebellhousing clearancing, which is covered in the instructions. You can view the instructions \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Transmission_Adapter_Rev_B.pdf?17571351903105355291\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill an NA 300ZX Clutch hold up to the power output of these engines? Why not use the TT Clutch??\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe 300ZX Twin Turbo 250mm clutch is unique to the TT, and as a result, there are very few suppliers \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor pressure plates which raises costs and decreases options. The Non-Turbo 240mm clutch bolt pattern is shared \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ewith the R32 Skyline GTR, 350Z, 370Z, G35, G37, and others. Because of this diversity, Non-Turbo \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eclutches are cheaper and available in HIGHER torque ratings than TT clutches!!! \u003cspan class=\"Normal_text\"\u003eDon't believe the TT \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eClutch Hype!!!\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eI've never heard of LOJ Innovations before, how can I trust your flywheel?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eAll of our flywheels are manufactured exclusively for LOJ Innovations by \u003c\/span\u003e\u003ca href=\"http:\/\/clutchmasters.com\/index.php?module=site\u0026amp;action=GetPage\u0026amp;id=22\u0026amp;nav=leftnav_products.tpl\"\u003e\u003cspan class=\"Normal_text\"\u003eClutchmasters\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"Normal_text\"\u003e whom have a \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003estellar reputation in the sport compact community for quality and durability.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my car?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, There is one 2\"x2\" area in the transmission tunnel that will need to be dented to clear the \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003espeedometer sensor. This is under the passenger seat area and does not affect any clearances within \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ethe car. There is also clearancing required for the starter, since the transmission and starter assembly \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eis moved to the rear with this kit. This is all covered in the instructions, which can be downloaded on \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eour Support page.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use my short shifter?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, any shifter that will work with the Z32 300ZX will work with our bracket.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Z32_LS_Swap_Kit_Z32_Trans_Instructions_Rev_A.pdf?17571351903105355291\"\u003eDownload Instructions Here\u003c\/a\u003e\u003cspan\u003e (PDF)\u003c\/span\u003e\u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2672645799957,"sku":null,"price":2999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_03.jpg?v=1756742568"},{"product_id":"300zx-lsx-basic-swap-kit-z33-transmission","title":"300ZX LSx BASIC Swap Kit - 350Z \/ 370Z Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Basic Swap kit is the most economical engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible. Every component required to successfully bolt an LSx Gen 3 or 4 engine into your Non-Turbo 300ZX is included with this kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses 350Z or 370Z Manual transmissions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z33 Transmission \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 350Z \/ 370Z Swap Shortened Shift Linkage \u003cstrong\u003e*Note: Even with this Shortened Shift Linkage, the shifter will be 2.5\" Back from the stock position\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 350Z \/ 370Z Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(Flywheel accepts 350Z\/G35 Clutch)\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Mini Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Driveshaft\u003c\/strong\u003e (Available in Steel, Aluminum, and Carbon Fiber)\u003cspan style=\"line-height: 1.4;\"\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2672649207829,"sku":null,"price":3669.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z33LS-TRAD_LOJ_Conversions_350Z_G35_LS_Swap_Transmission_Adapter_03_c7646803-8af0-4b09-b3ac-39a5c4578bb4.jpg?v=1756742566"},{"product_id":"300zx-lsx-intermediate-swap-kit-4l60e-transmission","title":"300ZX LSx INTERMEDIATE Swap Kit - 4L60E Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Intermediate Swap kit is a comprehensive engine installation package for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. The intermediate kit adds a number of useful features over the Basic Swap kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM 4L60E Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe INTERMEDIATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the basic kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for 4L60E Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heater control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) Required Corvette Harmonic Balancer (Crank Pulley) and C6 Corvette Water Pump available separately!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eAeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)**\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e** Fuel pumps are ONLY included with Non-Turbo Kits, Twin Turbo cars can retain their factory fuel pump. You can elect not to include the fuel pump, but an upgraded pump over stock will be requied!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUse of GM 4L60 Transmissions require SIGNIFICANT modifications to transmission tunnel! \u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe amount of modifications varies depending on which 4L60 you decide to run. The earlier transmissions with the integrated bellhousing require less work than the later transmissions with the removable bellhousing.\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. This is the area where the amount of denting will vary on which trans used. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. Lastly, the actual mounting point on the car will need to be cut on the passenger side. Please look at our 4L60 trans mount, and you will see that the passenger side of the mount only uses 2 of the three mounting holes. The mount location interferes with the trans pan which is why it needs to be cut out.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2688373194773,"sku":null,"price":2799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_4L60_03_5ea2ab86-8ecb-4cd9-9515-905594e6381f.jpg?v=1756742563"},{"product_id":"300zx-lsx-intermediate-swap-kit-th400-transmission","title":"300ZX LSx INTERMEDIATE Swap Kit - TH400 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Intermediate Swap kit is a comprehensive engine installation package for the 1990-1996 Nissan 300ZX Non-Tubro and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. The intermediate kit adds a number of useful features over the Basic Swap kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM TH400 Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe INTERMEDIATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the basic kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for TH400 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heater control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) Required Corvette Harmonic Balancer (Crank Pulley) and C6 Corvette Water Pump available separately!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eAeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)**\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e** Fuel pumps are ONLY included with Non-Turbo Kits, Twin Turbo cars can retain their factory fuel pump. You can elect not to include the fuel pump, but an upgraded pump over stock will be requied!\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2688489160725,"sku":null,"price":2799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_TH400_01_dca2d98d-2aad-459b-857f-66c9822c6142.jpg?v=1756742561"},{"product_id":"300zx-lsx-intermediate-swap-kit-t56-transmissions","title":"300ZX LSx INTERMEDIATE Swap Kit - T56 Transmissions","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Intermediate Swap kit is a comprehensive engine installation package for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. The intermediate kit adds a number of useful features over the Basic Swap kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM T56 Manual Transmission (GTO Shift Linkage Preferred**)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe INTERMEDIATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the basic kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for T56 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) Required Corvette Harmonic Balancer (Crank Pulley) and C6 Corvette Water Pump available separately!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eAeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)***\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e**GTO Shift linkage will place the shifter in the stock location. CTS-V Linkage will place the shifter behind stock and F-Body will be ahead of the stock opening. For installation simplicity, the GTO shifter is easier to adapt due to its rigid mounting to the transmission. A GTO shifter can be installed onto an F-Body transmission with relative ease.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*** Fuel pumps are ONLY included with Non-Turbo Kits, Twin Turbo cars can retain their factory fuel pump. You can elect not to include the fuel pump, but an upgraded pump over stock will be requied!\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. \u003c\/div\u003e\n\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2689167851541,"sku":null,"price":2799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_T56_02_800c3ad9-edc5-45ab-86ab-92717ec24afd.jpg?v=1756742556"},{"product_id":"300zx-lsx-intermediate-swap-kit-z32-transmission-1","title":"300ZX LSx INTERMEDIATE Swap Kit - Z32 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Intermediate Swap kit is a comprehensive engine installation package for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. The intermediate kit adds a number of useful features over the Basic Swap kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis intermediate kit uses your stock 300ZX Manual Transmission (NA or TT)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe INTERMEDIATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the basic kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z32 300ZX (Transmission is Relocated to the rear 3\"\/75mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Shortened Shift Linkage (to keep shifter in stock location after transmission relocation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Z32 Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(300ZX Flywheel accepts 350Z\/G35\/R32GTR\/Z32NA Clutch and uses a TT ring gear, Starter shim included for NA transmission use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) Required Corvette Harmonic Balancer (Crank Pulley) and C6 Corvette Water Pump available separately!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eOPTIONAL Aeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)**\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003e\u003cstrong\u003eFrequently Asked Questions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use a T56\/TR6060? \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, please see our swap kit for GM transmissions by \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-non-turbo-1990-1996-swap-kits\/products\/300zx-non-turbo-lsx-intermediate-swap-kit-t56-transmission\" title=\"clicking here\"\u003eclicking here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan\u003eWhy use the 300ZX transmission then?\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur swap kit was designed from the get-go to use the stock Nissan 5-Speed. There are several reasons \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor this:\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe RS5R30A transmission found in the Z32 300ZX is a VERY STOUT transmission. This is the same \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003etransmission that is found in the R32 and R33 Nissan Skyline GTRs, just in RWD guise. It is robust, has \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eample aftermarket support, and can be found inexpensively.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe T56\/TR6060, while great transmissions, are expensive and difficult to come by. \u003c\/span\u003e\u003cspan class=\"Normal_text\"\u003eOur complete swap \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003ekit costs about the same as a T56\/TR6060 and an aftermarket aluminum flywheel!\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eMost folks performing this swap will have an easier time finding an LS engine from an automatic \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eequipped vehicle. Our kit saves you the trouble of finding a T56 and includes a billet aluminum flywheel \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eto boot.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYou're moving the transmission, do I need a new driveshaft?\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, and a new driveshaft is available with our kit! If you do not want to buy a new driveshaft, you CAN have your stock driveshaft or aftermarket 1-piece driveshaft shortened. We can perform this service for $150+shipping if you'd like. There is an approximate 1-week turnaround time for this service. Please contact us for more information.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eRegardless of Transmission Used (NA or TT), an NA Clutch is required.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWhat about my stock automatic transmission?\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur adapter plate will allow the stock automatic transmission (Turbo RE4R03A or NA RE5R03A) to \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ephysically bolt to the engine. However, we do not stock flexplates that will allow the converter to attach. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eWe can make these on a special order basis, please contact us for more information. Please keep in \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003emind, the GM PCM can not control the Z32 transmission. This will the require the user to purchase and \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eprogram a standalone transmission controller. Furthermore, the NA transmission was not designed to \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ehandle the power of even a stock 5.3L LM4. If you would like to stay auto, we highly recommend \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-non-turbo-1990-1996-swap-kits\/products\/300zx-non-turbo-lsx-intermediate-swap-kit-4l60e-transmission\"\u003eour kit for using the 4L60E\u003c\/a\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my transmission?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eNo modifications are required when using a TT Transmission, an NA transmission will require slight \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ebellhousing clearancing, which is covered in the instructions. You can view the instructions \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Transmission_Adapter_Rev_B.pdf?17571351903105355291\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill an NA 300ZX Clutch hold up to the power output of these engines? Why not use the TT Clutch??\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe 300ZX Twin Turbo 250mm clutch is unique to the TT, and as a result, there are very few suppliers \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor pressure plates which raises costs and decreases options. The Non-Turbo 240mm clutch bolt pattern is shared \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ewith the R32 Skyline GTR, 350Z, 370Z, G35, G37, and others. Because of this diversity, Non-Turbo \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eclutches are cheaper and available in HIGHER torque ratings than TT clutches!!! \u003cspan class=\"Normal_text\"\u003eDon't believe the TT \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eClutch Hype!!!\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eI've never heard of LOJ before, how can I trust your flywheel?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eAll of our flywheels are manufactured exclusively for LOJ by \u003c\/span\u003e\u003ca href=\"http:\/\/clutchmasters.com\/index.php?module=site\u0026amp;action=GetPage\u0026amp;id=22\u0026amp;nav=leftnav_products.tpl\"\u003e\u003cspan class=\"Normal_text\"\u003eClutchmasters\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"Normal_text\"\u003e whom have a \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003estellar reputation in the sport compact community for quality and durability.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my car?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, There is one 2\"x2\" area in the transmission tunnel that will need to be dented to clear the \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003espeedometer sensor. This is under the passenger seat area and does not affect any clearances within \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ethe car. There is also clearancing required for the starter, since the transmission and starter assembly \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eis moved to the rear with this kit. This is all covered in the instructions, which can be downloaded on \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eour Support page.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use my short shifter?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, any shifter that will work with the Z32 300ZX will work with our bracket.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Z32_LS_Swap_Kit_Z32_Trans_Instructions_Rev_A.pdf?17571351903105355291\"\u003eDownload Instructions Here\u003c\/a\u003e\u003cspan\u003e (PDF)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e** \u003cem\u003eFuel pumps are ONLY included with Non-Turbo Kits, Twin Turbo cars can retain their factory fuel pump. You can elect not to include the fuel pump, but an upgraded pump over stock will be requied!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2692215046165,"sku":null,"price":4299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_03_3d008463-c11e-40af-8a3b-5c258b6d6c43.jpg?v=1756742552"},{"product_id":"300zx-lsx-intermediate-swap-kit-z33-transmission","title":"300ZX LSx INTERMEDIATE Swap Kit - 350Z \/ 370Z Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Intermediate Swap kit is a comprehensive engine installation package for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for the 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. The intermediate kit adds a number of useful features over the Basic Swap kit.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis intermediate kit uses 350Z or 370Z Manual Transmissions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe INTERMEDIATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the basic kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ 300ZX Swap Transmission Mount for Z33 Transmission \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ 350Z \/ 370Z Swap Shortened Shift Linkage \u003cstrong\u003e*Note: Even with this Shortened Shift Linkage, the shifter will be 2.5\" Back from the stock position\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ 350Z \/ 370Z Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(Flywheel accepts 350Z\/G35 Clutch)\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Mini Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) Required Corvette Harmonic Balancer (Crank Pulley) and C6 Corvette Water Pump available separately!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eAeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)**\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cem\u003e** Fuel pumps are ONLY included with Non-Turbo Kits, Twin Turbo cars can retain their factory fuel pump. You can elect not to include the fuel pump, but an upgraded pump over stock will be requied!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2692229791765,"sku":null,"price":4969.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z33LS-TRAD_LOJ_Conversions_350Z_G35_LS_Swap_Transmission_Adapter_02_cf512620-663c-4502-b3f3-03118fc7a74d.jpg?v=1756742550"},{"product_id":"300zx-lsx-master-swap-kit-4l60e-transmission","title":"300ZX LSx MASTER Swap Kit - 4L60E Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Master Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our intermediate kit plus even more features!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM 4L60E Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe MASTER Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the intermediate kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for 4L60E Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring)\u003cem\u003e LOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Harness (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e** \u003cspan\u003eNon-Turbo Cars will incur an additional fee to cover an Aeromotive Fuel Pump. The stock TT Fuel pump is sufficient for feeding an LS engine, but a factory Na pump is not. If your NA car already has an upgraded pump, select a TT chassis.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM 4L60 Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. This is the area where the amount of denting will vary on which trans used. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. Lastly, the actual mounting point on the car will need to be cut on the passenger side. Please look at our 4L60 trans mount, and you will see that the passenger side of the mount only uses 2 of the three mounting holes. The mount location interferes with the trans pan which is why it needs to be cut out.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2784053690389,"sku":null,"price":5449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_4L60_01_f5a6ceee-ba94-4ea9-9d95-bda811f32ac5.jpg?v=1756742546"},{"product_id":"300zx-lsx-master-swap-kit-th400-transmission","title":"300ZX LSx MASTER Swap Kit - TH400 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Master Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our intermediate kit plus even more features!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM TH400 Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe MASTER Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the intermediate kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for TH400 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAeromotive Stealth 360LPH Drop-In Fuel Pump for your Non-Turbo 300ZX (Non-Turbo Z pumps will not supply enough fuel at the LSx base fuel pressure of 58psi)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2787526115349,"sku":null,"price":5399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_TH400_01_87b31fca-256f-4ae1-9794-5ed228b59484.jpg?v=1756742542"},{"product_id":"300zx-lsx-master-swap-kit-t56-transmission","title":"300ZX LSx MASTER Swap Kit - T56 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Master Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our intermediate kit plus even more features!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM T56 Manual Transmission (GTO Shift Linkage Preferred**)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe MASTER Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the intermediate kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for T56 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction) \u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eTilton 75 Series Clutch Master Cylinder and Firewall Adapter. The stock 300ZX Clutch Master Cylinder is incompatible with the T56 Clutch Slave Cylinder.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e**GTO Shift linkage will place the shifter in the stock location. CTS-V Linkage will place the shifter behind stock and F-Body will be ahead of the stock opening. For installation simplicity, the GTO shifter is easier to adapt due to its rigid mounting to the transmission. A GTO shifter can be installed onto an F-Body transmission with relative ease.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2787579592725,"sku":null,"price":5649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_T56_02_5722630e-9024-48e4-9120-83e8e5e7a5be.jpg?v=1756742540"},{"product_id":"300zx-lsx-master-swap-kit-z32-transmission","title":"300ZX LSx MASTER Swap Kit - Z32 Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Master Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our intermediate kit plus even more features!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis swap kit uses your stock 300ZX Manual Transmission (NA or TT) \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe MASTER Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the intermediate kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z32 300ZX (Transmission is Relocated to the rear 3\"\/75mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Shortened Shift Linkage (to keep shifter in stock location after transmission relocation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Z32 Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(300ZX Flywheel accepts 350Z\/G35\/R32GTR\/Z32NA Clutch and uses a TT ring gear, Starter shim included for NA transmission use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Mid-Pipes by Kooks (Allows our headers to bolt directly to your stock or aftermarket cat-back exhaust system, 2.5\" or 3\", with or without cats)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003e\u003cstrong\u003eFrequently Asked Questions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use a T56\/TR6060? \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, please see out swap kit for GM transmissions by \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-twin-turbo-1990-1996-swap-kits\/products\/300zx-twin-turbo-lsx-deluxe-swap-kit-t56-transmission\" title=\"clicking here\"\u003eclicking here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan\u003eWhy use the 300ZX transmission then?\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur swap kit was designed from the get-go to use the stock Nissan 5-Speed. There are several reasons \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor this:\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe RS5R30A transmission found in the Z32 300ZX is a VERY STOUT transmission. This is the same \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003etransmission that is found in the R32 and R33 Nissan Skyline GTRs, just in RWD guise. It is robust, has \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eample aftermarket support, and can be found inexpensively.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe T56\/TR6060, while great transmissions, are expensive and difficult to come by. \u003c\/span\u003e\u003cspan class=\"Normal_text\"\u003eOur complete swap \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003ekit costs about the same as a T56\/TR6060 and an aftermarket aluminum flywheel!\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eMost folks performing this swap will have an easier time finding an LS engine from an automatic \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eequipped vehicle. Our kit saves you the trouble of finding a T56 and includes a billet aluminum flywheel \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eto boot.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYou're moving the transmission, do I need a new driveshaft?\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, and a new driveshaft is available with our kit! If you do not want to buy a new driveshaft, you CAN have your stock driveshaft or aftermarket 1-piece driveshaft shortened. We can perform this service for $150+shipping if you'd like. There is an approximate 1-week turnaround time for this service. Please contact us for more information.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eRegardless of Transmission Used (NA or TT), an NA Clutch is required.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWhat about my stock automatic transmission?\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eOur adapter plate will allow the stock automatic transmission (Turbo RE4R03A or NA RE5R03A) to \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ephysically bolt to the engine. However, we do not stock flexplates that will allow the converter to attach. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eWe can make these on a special order basis, please contact us for more information. Please keep in \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003emind, the GM PCM can not control the Z32 transmission. This will the require the user to purchase and \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eprogram a standalone transmission controller. Furthermore, the NA transmission was not designed to \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ehandle the power of even a stock 5.3L LM4. If you would like to stay auto, we highly recommend \u003ca href=\"http:\/\/loj-conversions-llc.myshopify.com\/collections\/300zx-twin-turbo-1990-1996-swap-kits\/products\/300zx-twin-turbo-lsx-deluxe-swap-kit-4l60e-transmission\"\u003eour kit for using the 4L60E\u003c\/a\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my transmission?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eNo modifications are required when using a TT Transmission, an NA transmission will require slight \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ebellhousing clearancing, which is covered in the instructions. You can view the instructions \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Transmission_Adapter_Rev_B.pdf?17571351903105355291\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill an NA 300ZX Clutch hold up to the power output of these engines? Why not use the TT Clutch??\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eThe 300ZX Twin Turbo 250mm clutch is unique to the TT, and as a result, there are very few suppliers \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003efor pressure plates which raises costs and decreases options. The Non-Turbo 240mm clutch bolt pattern is shared \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ewith the R32 Skyline GTR, 350Z, 370Z, G35, G37, and others. Because of this diversity, Non-Turbo \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eclutches are cheaper and available in HIGHER torque ratings than TT clutches!!! \u003cspan class=\"Normal_text\"\u003eDon't believe the TT \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eClutch Hype!!!\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eI've never heard of LOJ before, how can I trust your flywheel?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eAll of our flywheels are manufactured exclusively for LOJ by \u003c\/span\u003e\u003ca href=\"http:\/\/clutchmasters.com\/index.php?module=site\u0026amp;action=GetPage\u0026amp;id=22\u0026amp;nav=leftnav_products.tpl\"\u003e\u003cspan class=\"Normal_text\"\u003eClutchmasters\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"Normal_text\"\u003e whom have a \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003estellar reputation in the sport compact community for quality and durability.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eWill this kit require any modifications to my car?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, There is one 2\"x2\" area in the transmission tunnel that will need to be dented to clear the \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003espeedometer sensor. This is under the passenger seat area and does not affect any clearances within \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003ethe car. There is also clearancing required for the starter, since the transmission and starter assembly \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eis moved to the rear with this kit. This is all covered in the instructions, which can be downloaded on \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan class=\"xr_tl Normal_text\"\u003eour Support page.\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eCan I use my short shifter?\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cspan class=\"xr_tl Normal_text\"\u003e\u003cspan class=\"Normal_text\"\u003eYes, any shifter that will work with the Z32 300ZX will work with our bracket.\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/files\/GEN_III_Z32_LS_Swap_Kit_Z32_Trans_Instructions_Rev_A.pdf?17571351903105355291\"\u003eDownload Instructions Here\u003c\/a\u003e\u003cspan\u003e (PDF)\u003c\/span\u003e\u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2788033757205,"sku":null,"price":7649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_03_b4428884-ff53-48e6-a5fd-ee325ec583ed.jpg?v=1756742537"},{"product_id":"300zx-lsx-master-swap-kit-z33-transmission","title":"300ZX LSx MASTER Swap Kit - 350Z \/ 370Z Transmission","description":"\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Master Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our intermediate kit plus even more features!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis swap kit uses a 350Z or 370Z Manual Transmissions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe MASTER Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the intermediate kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ 300ZX Swap Transmission Mount for Z33 Transmission \u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ 350Z \/ 370Z Swap Shortened Shift Linkage \u003cstrong\u003e*Note: Even with this Shortened Shift Linkage, the shifter will be 2.5\" Back from the stock position\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003eLOJ 350Z \/ 370Z Transmission to LSx Adapter Plate \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(Flywheel accepts 350Z\/G35 Clutch)\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Mini Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Mid-Pipes by Kooks (Allows our headers to bolt directly to your stock or aftermarket cat-back exhaust system, 2.5\" or 3\", with or without cats)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #cc0000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2788065443861,"sku":null,"price":8299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z33LS-TRAD_LOJ_Conversions_350Z_G35_LS_Swap_Transmission_Adapter_01_f7337f27-2ad0-4af7-8b07-ea86a96fa6d5.jpg?v=1756742535"},{"product_id":"300zx-lsx-ultimate-swap-kit-4l60e-transmission","title":"300ZX LSx ULTIMATE Swap Kit - 4L60E Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX Ultimate Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our master kit plus even more features! This package takes ALL of the guess work out of your swap! It addresses engine mounting, fuel system, EFI wiring, exhaust, intake, cooling system, accessories, and more!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM 4L60E Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe ULTIMATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the master kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for 4L60E Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eLOJ Conversions LS Swap Street Radiator by C\u0026amp;R Racing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eLOJ Conversions Radiator Fan Package (Dual 11\" SPAL Fans for Street Radiator, Single 16\" SPAL Fan for Race Radiator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eBrake Booster Vacuum Hose Kit With OEM Nissan In-line Check Valve \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM 4L60 Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. This is the area where the amount of denting will vary on which trans used. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. Lastly, the actual mounting point on the car will need to be cut on the passenger side. Please look at our 4L60 trans mount, and you will see that the passenger side of the mount only uses 2 of the three mounting holes. The mount location interferes with the trans pan which is why it needs to be cut out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2809989890069,"sku":null,"price":8369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_4L60_03_6fc90bdc-48a8-40cc-939f-cc3e37c8baf0.jpg?v=1756742531"},{"product_id":"300zx-lsx-ultimate-swap-kit-t56-transmission","title":"300ZX LSx ULTIMATE Swap Kit - T56 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX \u003c\/span\u003e\u003cspan\u003eUltimate\u003c\/span\u003e\u003cspan\u003e Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our \u003c\/span\u003e\u003cspan\u003emaster\u003c\/span\u003e\u003cspan\u003e kit plus even more features! This package takes ALL of the guess work out of your swap! It addresses engine mounting, fuel system, EFI wiring, exhaust, intake, cooling system, accessories, and more!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM T56 Manual Transmission (GTO Shift Linkage Preferred**)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe ULTIMATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the master kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for T56 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f90303;\"\u003eLOJ Conversions LS Swap Radiator by C\u0026amp;R Racing (Street or Race style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f90303;\"\u003eLOJ Conversions Radiator Fan Package (Dual 11\" SPAL Fans for Street Radiator, Single 16\" SPAL Fan for Race Radiator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f90303;\"\u003eBrake Booster Vacuum Hose Kit With OEM Nissan In-line Check Valve \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f90303;\"\u003eTilton 75 Series Clutch Master Cylinder and Firewall Adapter. The stock 300ZX Clutch Master Cylinder is incompatible with the T56 Clutch Slave Cylinder.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e**GTO Shift linkage will place the shifter in the stock location. CTS-V Linkage will place the shifter behind stock and F-Body will be ahead of the stock opening. For installation simplicity, the GTO shifter is easier to adapt due to its rigid mounting to the transmission. A GTO shifter can be installed onto an F-Body transmission with relative ease.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2810234699797,"sku":null,"price":8569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_T56_01_a528a127-d490-442a-b18d-fb70cc9d394e.jpg?v=1756742529"},{"product_id":"300zx-lsx-ultimate-swap-kit-th400-transmission","title":"300ZX LSx ULTIMATE Swap Kit - TH400 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX \u003c\/span\u003e\u003cspan\u003eUltimate\u003c\/span\u003e\u003cspan\u003e Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our \u003c\/span\u003e\u003cspan\u003emaster\u003c\/span\u003e\u003cspan\u003e kit plus even more features! This package takes ALL of the guess work out of your swap! It addresses engine mounting, fuel system, EFI wiring, exhaust, intake, cooling system, accessories, and more!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM TH400 Automatic Transmission\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe ULTIMATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the master kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for TH400 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block \u003cspan\u003e(to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring) \u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003eLOJ Conversions LS Swap Radiator by C\u0026amp;R Racing (Street or Race style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003eLOJ Conversions Radiator Fan Package (Dual 11\" SPAL Fans for Street Radiator, Single 16\" SPAL Fan for Race Radiator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003eBrake Booster Vacuum Hose Kit With OEM Nissan In-line Check Valve \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. Additionally, the trans tunnel will need hammering along the sides around the bottom for clearing the sides of the trans pan. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2810343882773,"sku":null,"price":8319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_TH400_02_4f3c18cd-1960-4a21-8d73-cc5af8a07b40.jpg?v=1756742528"},{"product_id":"300zx-lsx-ultimate-swap-kit-z32-transmission","title":"300ZX LSx ULTIMATE Swap Kit - Z32 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX \u003c\/span\u003e\u003cspan\u003eUltimate\u003c\/span\u003e\u003cspan\u003e Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our \u003c\/span\u003e\u003cspan\u003emaster\u003c\/span\u003e\u003cspan\u003e kit plus even more features! This package takes ALL of the guess work out of your swap! It addresses engine mounting, fuel system, EFI wiring, exhaust, intake, cooling system, accessories, and more!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis swap kit uses your stock 300ZX Manual Transmission (NA or TT) \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe ULTIMATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the master kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z32 300ZX (Transmission is Relocated to the rear 3\"\/75mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Shortened Shift Linkage (to keep shifter in stock location after transmission relocation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Z32 Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(300ZX Flywheel accepts 350Z\/G35\/R32GTR\/Z32NA Clutch and uses a TT ring gear, Starter shim included for NA transmission use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring)\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Swap Mid-Pipes by Kooks (Allows our headers to bolt directly to your stock or aftermarket cat-back exhaust system, 2.5\" or 3\", with or without cats)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eLOJ Conversions LS Swap Street Radiator by C\u0026amp;R Racing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eLOJ Conversions Radiator Fan Package (Dual 11\" SPAL Fans for Street Radiator, Single 16\" SPAL Fan for Race Radiator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0505;\"\u003eBrake Booster Vacuum Hose Kit With OEM Nissan In-line Check Valve \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2810660225045,"sku":null,"price":10589.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Basic_03_ebbdf06d-3314-4d76-9eb4-9e19aac6edc8.jpg?v=1756742526"},{"product_id":"300zx-lsx-ultimate-swap-kit-z33-transmission","title":"300ZX LSx ULTIMATE Swap Kit - 350Z \/ 370Z Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cspan\u003eThe LOJ Conversions Gen III\/IV Chevrolet LS Engine into 300ZX \u003c\/span\u003e\u003cspan\u003eUltimate\u003c\/span\u003e\u003cspan\u003e Swap kit is the most comprehensive engine installation package available for the 1990-1996 Nissan 300ZX Non-Turbo and Twin Turbo. This kit has been engineered specifically for your 300ZX to make the installation of your LS engine as simple as possible while retaining ALL of the OEM functionality you have come to love in your Z car. This kit includes everything found in our \u003c\/span\u003e\u003cspan\u003emaster\u003c\/span\u003e\u003cspan\u003e kit plus even more features! This package takes ALL of the guess work out of your swap! It addresses engine mounting, fuel system, EFI wiring, exhaust, intake, cooling system, accessories, and more!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis swap kit uses a 350Z or 370Z Manual Transmissions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe ULTIMATE Kit Includes \u003cspan style=\"color: #cc0000;\"\u003e(parts added over the master kit are in red)\u003c\/span\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ 300ZX Swap Transmission Mount for Z33 Transmission \u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003eLOJ 350Z \/ 370Z Swap Shortened Shift Linkage \u003cstrong\u003e*Note: Even with this Shortened Shift Linkage, the shifter will be 2.5\" Back from the stock position\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx Swap Heater Block (to prevent cavatation induced overheating from Nissan heat control valve)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Heater Core Outlets\u003c\/li\u003e\n\u003cli\u003eLOJ 350Z \/ 370Z Transmission to LSx Adapter Plate \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(Flywheel accepts 350Z\/G35 Clutch)\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Mini Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Filter Relocation Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Returnless Fuel System Conversion (Includes OEM Style GM Filter\/Regulator and all necessary lines pre-cut with QD fitings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Accessory Drive Kit (Allows mounting your NA Power Steering Pump and NA\/TT Alternator to the LSx engine in their stock locations to retain your stock High Pressure PS Hose and Alt Wiring)\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eLOJ Accessory Drive \u003cstrong\u003eONLY\u003c\/strong\u003e works with C6 Corvette Water Pump and Corvette Offset Crank Pulley, available as an option.\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Oil Pressure Sender Adapter (Keep your stock Oil Pressure Gauge)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Swap Mid-Pipes by Kooks (Allows our headers to bolt directly to your stock or aftermarket cat-back exhaust system, 2.5\" or 3\", with or without cats)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eLOJ LSx to 300ZX Swap Harness by PSI Conversions (Brand new harness made specifically for this swap and include detailed instructions for trouble-free installation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4; color: #000000;\"\u003eRemanufactured and Reflashed stock GM ECU (Removes VATS and other swap related trouble codes, also reprogrammed so your stock Tach and Speedo function properly)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f70000;\"\u003eLOJ Conversions LS Swap Street Radiator by C\u0026amp;R Racing \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f70000;\"\u003eLOJ Conversions Radiator Fan Package (Dual 11\" SPAL Fans for Street Radiator, Single 16\" SPAL Fan for Race Radiator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f70000;\"\u003eBrake Booster Vacuum Hose Kit With OEM Nissan In-line Check Valve \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":2810852966421,"sku":null,"price":11249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z33LS-TRAD_LOJ_Conversions_350Z_G35_LS_Swap_Transmission_Adapter_04_b0f0728e-4067-4d39-9d17-5d0f94402656.jpg?v=1756742524"},{"product_id":"300zx-lsx-drift-missile-kit-t56-transmission","title":"300ZX LSx Drift Missile Kit - T56 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\u003cstrong\u003eNEW! LOJ Conversions Drift Missile Kits!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions has a long history of providing comprehensive swap kits for reliable and powerful daily driven vehicles. However, not everyone wants to build a daily driver. If you're looking to build a drift missile and just want the parts necessary to get the motor in the car and start killing tires, this is the kit for you!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions Engine Mounts are designed using the latest computer aided technology, and our cross-bolted captive urethane mount is superior to the competition's mounts that use urethane bushings with studs on each side. These inferior stud style mounts tear themselves apart under the abusive use seen in drifting, where the LOJ mounts simply can-not fail in this manner!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions oil pans have been proven time and time again to provide superior oil control to all other swap oil pans on the market, and reliably supply your LS engine with oil pressure run after run.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eRest assured, the same durability that has allowed LOJ Swapped 300ZX's to log 50,000+ trouble free daily driven miles translates to unprecedented reliability in competitive use as well. Spend less time fixing inferior products and more time killing tires!!!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses a GM T56 Manual Transmission (GTO Shift Linkage Preferred**)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Transmission Mount for T56 Transmission (CNC Cut and Bent, Powdercoated, includes Hardware and Energy Suspension Mount)\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Swap Headers by Kooks (No modifications to car required, 1-7\/8\" Primaries, 3\" scavenging collectors, all SS construction, LIFETIME WARRANTY)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cp\u003e\u003cem\u003e* Capacity can vary from 6.0 to 7.0 quarts depending on oil filter relocation setup and use of an oil cooler or not\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e**GTO Shift linkage will place the shifter in the stock location. CTS-V Linkage will place the shifter behind stock and F-Body will be ahead of the stock opening. For installation simplicity, the GTO shifter is easier to adapt due to its rigid mounting to the transmission. A GTO shifter can be installed onto an F-Body transmission with relative ease.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUse of GM Transmissions require modifications to transmission tunnel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003eNo fabrication is required for the install and all of the structure under the dash can be retained. The dash does not need to be removed. The trans tunnel requires hammering in the transition area where the tunnel area meets the bellhousing area and where the bellhousing area meets the firewall. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":31153058578534,"sku":null,"price":2899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Kit_Drift_Missile_T56_02.jpg?v=1756742367"},{"product_id":"300zx-lsx-drift-missile-kit-z33-transmission","title":"300ZX LSx Drift Missile Kit - Z33 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\u003cstrong\u003eNEW! LOJ Conversions Drift Missile Kits!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions has a long history of providing comprehensive swap kits for reliable and powerful daily driven vehicles. However, not everyone wants to build a daily driver. If you're looking to build a drift missile and just want the parts necessary to get the motor in the car and start killing tires, this is the kit for you!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions Engine Mounts are designed using the latest computer aided technology, and our cross-bolted captive urethane mount is superior to the competition's mounts that use urethane bushings with studs on each side. These inferior stud style mounts tear themselves apart under the abusive use seen in drifting, where the LOJ mounts simply can-not fail in this manner!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions oil pans have been proven time and time again to provide superior oil control to all other swap oil pans on the market, and reliably supply your LS engine with oil pressure run after run.\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions transmission adapters and flywheels have been proven time and time again in competition use and hold up under the abuse of competition drifting without issue. They can even be upgraded to a 8.5\" or 10\" twin disk arrangement to stand up to any abuse you can throw at it!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eRest assured, the same durability that has allowed LOJ Swapped 300ZX's to log 50,000+ trouble free daily driven miles translates to unprecedented reliability in competitive use as well. Spend less time fixing inferior products and more time killing tires!!!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses 350Z (Non-HR) Manual transmissions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe BASIC Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z33 Transmission \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 350Z Swap Shortened Shift Linkage \u003cstrong\u003e*Note: Even with the 350Z Shortened Shift Linkage, the shifter will be 2.5\" Back from the stock position\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Z33 Transmission to LSx Adapter Plate \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(Flywheel accepts 350Z\/G35 Clutch)\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Mini Starter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cspan style=\"line-height: 1.4;\"\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":31153064902758,"sku":null,"price":5049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z33LS-TRAD_LOJ_Conversions_350Z_G35_LS_Swap_Transmission_Adapter_03_ab7e213b-ffac-444a-8e0b-0bdffaac7855.jpg?v=1756742366"},{"product_id":"300zx-lsx-drift-missile-kit-z32-transmission-1","title":"300ZX LSx Drift Missile Kit - Z32 Transmission","description":"\u003cdiv class=\"strong\"\u003e\n\u003cdiv class=\"strong\"\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eNEW! LOJ Conversions Drift Missile Kits!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions has a long history of providing comprehensive swap kits for reliable and powerful daily driven vehicles. However, not everyone wants to build a daily driver. If you're looking to build a drift missile and just want the parts necessary to get the motor in the car and start killing tires, this is the kit for you!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions Engine Mounts are designed using the latest computer aided technology, and our cross-bolted captive urethane mount is superior to the competition's mounts that use urethane bushings with studs on each side. These inferior stud style mounts tear themselves apart under the abusive use seen in drifting, where the LOJ mounts simply can-not fail in this manner!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions oil pans have been proven time and time again to provide superior oil control to all other swap oil pans on the market, and reliably supply your LS engine with oil pressure run after run. Zandara Kennedy has run our wet sump oil pan in her Drift 350Z without a single oil control issue and swears by its quality and fitment. \u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eLOJ Conversions transmission adapters and flywheels have been proven time and time again in competition use and hold up under the abuse of competition drifting without issue. They can even be upgraded to a 8.5\" or 10\" twin disk arrangement to stand up to any abuse you can throw at it!\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003eRest assured, the same durability that has allowed LOJ Swapped 300ZX's to log 50,000+ trouble free daily driven miles translates to unprecedented reliability in competitive use as well. Spend less time fixing inferior products and more time killing tires!!!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThis kit uses your stock 300ZX Manual Transmission (NA or TT) \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"strong\"\u003e\u003cstrong\u003eThe Drift Missile Kit Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ LSx to 300ZX Motor Mounts (CNC Cut and Bent Motor Mount Brackets, Billet Aluminum Mount Pedestals with Energy Suspension Polyurethane Inserts, Brackets are powdercoated for durability and include hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Transmission Mount for Z32 300ZX (Transmission is Relocated to the rear 3\"\/75mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ LSx to 300ZX Oil Pan (6.5qt* Capacity, Road Race Baffling, Anti-Slosh Baffling, Dipstick, Pickup Tube, Gasket, Hardware - Zinc-Plated Steel Construction)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLOJ 300ZX Swap Shortened Shift Linkage (to keep shifter in stock location after transmission relocation)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLOJ Z32 Transmission to LSx Adapter Plate \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eLOJ Billet Aluminum Flywheel manufactured by Clutchmasters \u003c\/span\u003e(300ZX Flywheel accepts 350Z\/G35\/R32GTR\/Z32NA Clutch and uses a TT ring gear, Starter shim included for NA transmission use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriveshaft Optional \u003c\/b\u003e(Available in Steel, Aluminum, or Carbon Fiber)\u003cspan style=\"line-height: 1.4;\"\u003e \u003cem\u003eYou MUST either purchase a new driveshaft, or have your existing driveshaft shortened by 3\" (75mm) If you DO NOT want a driveshaft, enter coupon code \"NODRIVESHAFT\" at checkout.\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLOJ Conversions Engine Swap Headers by Kooks Custom Headers. These are 1-7\/8\" Primary, 3\" Collector, full Stainless Steel Construction with Merge Collectors, O2 bungs, 3\/8\" Thick Flanges, Hardware, and Gaskets. Headers are TIG welded and flanges are ground flat after construction. Headers are assembled in a CNC fixture for a consistent and perfect fit every time. Headers include a \u003c\/span\u003e\u003cstrong\u003elifetime warranty\u003c\/strong\u003e\u003cspan\u003e for the original purchaser.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LOJ Conversions","offers":[{"title":"Default Title","offer_id":32156996075622,"sku":null,"price":4399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/3576\/products\/Z32LS_LOJ_Conversions_Z32_300ZX_Non-Turbo_Twin_Turbo_LS_Swap_Drift_Missile_kit_01.jpg?v=1756742319"}],"url":"https:\/\/lojkits.com\/collections\/nissan-300zx-z32-engine-swap-kits\/lsx-all-gen-3-gen-4-small-block-chevy.oembed","provider":"LOJ Conversions","version":"1.0","type":"link"}